Connected on a desk with an AOC 27" monitor. Very convenient, easy to assemble, and you can put it on the desk with a clamp or screws. Indeed, the arm slightly tilts at the point where it connects to the base pipe, but it is imperceptible and because it has many settings for rotation and movement of the arm, you can easily bring the screen horizontally. Sturdy construction. Value for money.

Very nice base. I combined it with a dual base from the same company and I have two 21'' screens. The thickness of the desk is 1.5 cm and it fits perfectly

Simple, easy, aesthetically pleasing.
It's just not as tall as I would like.
I would like an extra 3 inches so that I can fit a printer underneath the screen (not that it won't work for you or that my need represents the ideal screen height --> I have a 27-inch monitor, so on a smaller one, there shouldn't be an issue logically).
But these 3 inches would simply enhance the overall ergonomics of the desk.

Nice sturdy construction but I would like the screen to be able to go higher on the vertical axis with this stand. It is short if you want it to be above another screen. That's why three stars.

Really awesome. Unbelievable for its price. I wouldn't want anything more than a stand.

Because the company has many similar models, before purchasing, look at the dimensions of each model and what dimensions you really need.

This particular model, for example, is one of the larger models in height. A shorter one wouldn't suit me for the intended use.

Finally, look at what the correct height of the screen is, calculate to have that height, at what height the Vesa base should be, and finally, based on this height, look for a stand. In this order, make the calculations, otherwise, you may get a stand that won't meet your needs.

It was placed on a 32-inch AOC monitor.
Quite sturdy.
So far, I haven't encountered any problems, neither during assembly nor during installation.

Very good stand for its price. I have placed a 32" screen, specifically the Samsung Smart M7. It is very sturdy, heavy but difficult to adjust. But once you find the position you want, you are okay and you won't worry if it falls.

It simply does its job correctly. I have had it in a doctor's office for months, up and down, right and left, with 3 people using it daily, and not even the screws have loosened

Top quality. I bought 3 to have full flexibility in how I want to position my screens. Sturdy construction, full height adjustment, 180-degree left-right movement, and the ability to tilt the screen vertically. I highly recommend it.

Very good and high-quality product. Sturdy construction. My chair is tall and my desk is low, yet it still has enough room for the monitor to be raised.

Very organized packaging, simple and comprehensive instructions, pads for the clamp so as not to leave marks, variety of screws, overall sturdy construction... at 24 (including shipping) that I bought it, I recommend it without a second thought.
WORTH IT!

Perfect arm. Very sturdy and stable. Great convenience! Easy assembly and long enough to change positions and angles on the screen. I highly recommend it.

I had never tried such bases before, and from the price, I didn't expect much, but it is very sturdy and well-made. I highly recommend it!

Anyone looking for a desk mount, this is the best one. It's worth every penny and more. In the workspace where I work, we have two desks and we were looking for a mount to free up space in front of the keyboards. We ended up choosing this one and ultimately found that it was the best option. Very easy to assemble. It screws easily onto the desk and then you can adjust it with the arm however you want. It also gives you the option to use just the arm, mounting it on the wall for example. The arm has the ability to rotate either as a whole or in parts. Overall, it is one of the best choices for a desk monitor.

I have had it for about a month, I have installed a 27-inch monitor. So far, the stand seems good, it has a sturdy construction and even though I rotate the monitor daily, the support stand remains stable at the same height without changing the tilt.

Excellent value for money. I wanted two bases and I didn't know which one to choose because there was also the Brateck LDT13-C012 and I didn't know which one would serve me better. Eventually, I bought both to try them out.
For now, it seems that the Brateck LDT12-C012N serves me better. Very easy installation, sturdy, and you can easily adjust the screen as you want.
The only drawback someone might find is that the height is not adjustable unless you loosen-tighten an allen key, unlike the Brateck LDT13-C012 which has a hydraulic system that is very easy to use (but this can also be a disadvantage, see comment on the other base).
Indeed, as others have mentioned, the arm slightly bends and when you pull the screen towards you and the arm extends, it lowers in height, but I find it perfectly normal.
Personally, I find it an excellent choice

Especially for its price, but also in general, its quality is acceptable.
Easy installation of the screen and attachment to the desk.
Quite stable with Ultra Wide screens and with screens - TVs over 35 inches.

The Arm bends slightly downwards due to the weight, but you can tilt the screen up a bit or put a small wedge under it to make it straight.

The cable management could have been clearly better, personally I used some black reusable zip ties that I had lying around.

The included Allen wrenches are nothing special, if you tighten them too much they will strip and lose their grip, but for being included in the box they are not bad.

For me, at this price (19 euros), it is excellent. And I would buy it again for the same price of 30 euros.

It is the second time I choose this particular stand. Sturdy construction and very good quality. Inside, it has all the screws that may be needed for the respective monitor or TV easy assembly. Get it with closed eyes!

Sturdy and very durable base. I used it to hold an LG 22" monitor. It comes with various screws and two types of brackets. You can attach it to your desk either as shown in the photo or by drilling a hole and placing it wherever you want, not just at the edge. It also comes with the necessary accessories. The downside is that the central arm with the base seems difficult to screw in easily, and if you're not careful, you can easily strip the threads. It doesn't require much pressure. Overall, I am very satisfied, although I haven't used it with a large screen.

Really good sturdy base, flexible and frees up a lot of space on the desk.
Comes with 2 types of supports, one with a clamp and the other with a hole if you want to place it in a more internal point of the desk and not peripherally.
Really good product at an amazing price.
I don't think there is anything better even with an extra 10-15 euros.
Also, assembly is very easy and it comes with the Allen wrenches needed. The only additional tool I needed was a screwdriver.

Very good build quality. Nicely organized all the screws and it comes with the necessary tools.

Buy it with closed eyes, and free up the space under the screen. It does what it promises. And at this price, what else can you ask for.

Old, sturdy, and durable. It has a 29-inch screen weighing 6 kilograms and through it, I can literally move it like a toy in all directions. It easily attaches to the desk without damaging it. Additionally, it has 3 points at the back for cable management. Great value for money choice!

AFTER 7 MONTHS.
The arm bends more than at the beginning without me touching it at all, I removed the screen and tightened everything without any result.

Initially
Negatives: the arm bends slightly from the weight (I have a 27-inch monitor weighing 3.5 kilograms).

Positives: it has a sturdy construction, no screws were needed for installation.

Comments: I wasn't thrilled with the cable management, but with 2-3 tie wraps it's good. However, the appearance of the desk changes significantly (but this can also happen with other stands).

I have placed it on an IKEA desk with a metal frame from the bottom, it has tightened perfectly without any problem. It doesn't move at all, it is very stable even with the screen. It is placed on an LG 29UM69G-B monitor. Installation and use without any problem. I don't know if it has any issues at 180 degrees because it doesn't concern me at the moment, I will mention it when I try it. I highly recommend it!

The base is very good, sturdy, and holds a 24-inch in place. Sufficient customization and it is definitely worth the money! I recommend it.

I have it for 2 months now.. the best thing ever!!
Very heavy, I didn't expect it to be so.. everything is great!!
I have a 27-inch LG on top... I recommend it!!

I have had it for 5 months on a widescreen 32 and it hasn't had any issues!!! Even though I constantly turn it upside down and left to right!! It can withstand more weight than 8!! I highly recommend it without hesitation!!

Very good arm
The packaging is perfect, it includes everything you need and spare parts. The assembly is not difficult and it is user-friendly in movements, etc