Inductive sensor with a nominal detection distance Sn 15 mm, surface mounting and 3-wire output, normally open PNP contact.

• Supply voltage: 10... 30VDC
• Guaranteed detection distance: (0.81 x Sn) mm
• Correction factors: St37 = 1, Al = 0.3, stainless steel = 0.7, Ms = 0.4
• Repeatability: 2 % full scale
• Thermal drift: ± 10 %
• Hysteresis: 3...15 %
• Nominal DC supply current: 200 mA
• No-load current I: 15 mA
• Residual current: 0.1 mA
• Nominal insulation voltage: 0.5 kV
• Short circuit protection: yes/ cyclic
• Voltage drop at I: 1.8 V
• Threaded cylinder: M30 x 1.5
• Dimensions: 64 mm
• Materials: housing metal, CuZn, chromed; active surface made of plastic, PA; termination made of plastic, EPTR
• Maximum tightening torque of housing nut: 75 Nm
• Cable: 5.2mm, LifYY, PVC, 2 m
• Cable cross-section: 3 x 0.34mm²
• Vibration resistance: 55 Hz (1 mm)
• Shock resistance: 30 g (11 ms)
• Protection rating: IP67
• Switching status indicator: yellow LED